CISCO DPC3939 (XB3) DUAL BAND WIFI TELEPHONE GATEWAY

Cisco

MSRP: $180.00
$150.00
Now: $99.95
(You save $80.05 )
Adding to cart… The item has been added

 **CISCO DPC3939 AMAZING LIMITED TIME DEAL!**

**SEE OUR ARRIS TG1682G LISTING FOR A COMPARABLE SUBSTITUTE**

 

 

 

Cisco voice gateway 3939 Model DPC3939 DOCSIS 3.0 8x4 Wireless Residential Voice Gateway

 

Cisco voice gateway 3939 Model DPC3939 DOCSIS 3.0 8x4 Wireless Residential Voice Gateway  

 

 

**SAVE UP TO $600 FOR EVERY 5 YEARS YOU OWN YOUR MODEM!**

 

 

CUT YOUR MONTHLY TV BILL NOW!

 

 

 

 

1 POWER—ON, power is applied to the Residential Gateway. OFF when power is 
off to the Residential Gateway.


2 US/DS—ON, the Residential Gateway is exchanging data with the cable 
network. Blinking indicates the downstream scan is in progress.


3 ONLINE—ON, the Residential Gateway is registered on the network and fully 
operational. OFF indicates the Residential Gateway has not registered on the 
network.


4 2.4 GHz—ON, the wireless access point is operational. Blinking indicates that 
data is being transferred over the wireless connection. OFF indicates that the 
wireless access point is not enabled.


5 5 GHz—ON, the wireless access point is operational. Blinking indicates that data 
is being transferred over the wireless connection. OFF indicates that the wireless 
access point is not enabled.


6 TEL1—ON indicates telephony service is enabled. Blinks when line 1 is in use. 
OFF indicates that phone service for TEL 1 is not enabled.


7 TEL2—ON indicates telephony service is enabled. Blinks when line 2 is in use. 
OFF indicates that phone service for TEL 2 is not enabled.


8 Cisco DPC3939 BATTERY (optional model only)—ON indicates that the battery is charged. 
Blinking indicates that the battery charge is low. OFF indicates the unit is 
operating from battery(Battery sold Separately)

Cisco voice gateway 3939 Model DPC3939 DOCSIS 3.0 8x4 Wireless Residential Voice Gateway

1 RESET—A momentary pressing (1-2 seconds) of this switch restarts the device. 
To press this switch, insert a thin object, such as a paper clip, into the RESET 
port; then press and hold the switch for more than ten seconds to reset all 
settings to their factory-settings and then restart the device.

 

2 Cisco DPC3939 USB Ports: (optional for some models)—Connects the Residential Gateway to selected 
devices. For models that support USB, the default is one USB port.


3 TEL1 and Alarm/Tel2—RJ-11 telephone ports for connecting telephones, fax

machines, and/or an analog home alarm system.


4 Cisco DPC3939 ETHERNET—Four RJ-45 Ethernet ports allow connection to the Ethernet port on 
your PC or network device.


5 MoCA/Cable—F-connector connects to your home coax network to provide 
Cable and MoCA service.


6 Cisco DPC3939 POWER—Connects the Residential Gateway to the AC wall outlet

 

 

CUT YOUR MONTHLY TV BILL NOW!

 

BUY NOW AND NEVER PAY ANOTHER LEASE FEE AGAIN!!

 

*Terms and Conditions apply to the following

 Payment Methods

**BUY THIS CISCO DPC3939 MODEM AND SAVE UP TO $600 EVERY 5 YEARS!**